[EYEN] modified sine wave inverter PG Series

1.OEM factory 2.Passed CE/ISO Cert 3.have trade with many countries 4.New product development ability

PG Modified Sine Wave Inverter

PG modified sine wave inverter is a combination of an inverter and a charge. It offers a smart, convenient and economic way to get AC power supply from DC source for most electrical equipment. When the AC input is available, it will switch to AC power supply and starts charging on the batteries.

 

Features1.With high frequency design and modified sine wave output, the modified sine wave inverter offers high efficiency. 2.Automatic switch between mains power and battery power supply. 3.Rack tower design, compact size for convenient use and storage4.Off mode charging function is available 5.Selectable switch for wider input voltage. 6.Full automatic and silent operation7.Built-in 10Amp super charger for up to 100Ah battery 8.Two-step intelligent charging control system is available to control recharging time. 9.The modified sine wave inverter comes with informative LED indicator and alarming functions. 10.Full protections against various abnormal situations11.Different AC outlet configurations are available: NEMA, Schuko, French, India, and BS136312.This is a small scale and cost effective modified pure sine wave inverter for home appliances and office equipment.

 

Technical Specifications

Model		PG 500	PG 1000	PG 2000
Capacity	VA/W	500VA / 300W	1000VA / 600W	2000VA / 1200W
Input	Phase	Single
	Voltage	110 / 120VAC or 220 / 230 / 240VAC
	Voltage Range	90 - 145VAC or 170-280VAC ( Narrow Range )
		50-145VAC / 90-280VAC (Wide Range)
Output	Phase	Single
	Voltage	120VAC or 230VAC
	Voltage Regulation(Batt. Mode)	+10% ~ 18%
	Frequency	50Hz or 60Hz
	Frequency Regulation (Batt. Mode)	+/- 0.1 Hz
	Output Waveform (Batt. Mode)	Modified Sine Wave
Power factor	P.F.	0.6
Battery	Charger Current	8 Amp + / - 1Amp	6 Amp + / - 1Amp	10 Amp + / - 1Amp
	Floating Voltage	13.7V + / - 0.2V	27.4V + / - 0.4V	27.4V + / - 0.4V
	Overcharge Protection	15V +/- 0.3V charger stops and fault	15V +/- 0.6V charger stops and fault	30V +/- 0.6V charger stops and fault
Transfer time	Typical	8ms
Efficiency	AC to AC	>95%
	DC to AC	>80%
Indicator	AC Mode	Solid Green LED
	Battery Mode	Solid Yellow LED
	Battery Charging Mode	Green LED flashes at 2 seconds intervals
	Overload	Red LED flashes at 0.5 second intervals
	Fault	Solid Red LED
Audible alarm	Low Battery at Battery Mode	Beeps at 2 seconds intervals
	Overload	Sounding at 0.5 second intervals
	Fault	Beeps Continuously
Protection	Full Protection	Deep Discharge, Overcharge, and Overload protection
Physical	Dimension (L×W×H) mm	224 ×260 × 80
	Net Weight (kgs)	1.7	1.9	2.5
Environment	Operating Environment	0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing)
	Noise Level	Less than 50dB

Note Product specifications are subject to change without prior notice.

[EYEN] modified sine wave inverter PG Series